DODGE RAM FORUM banner
1 - 8 of 8 Posts

·
Registered
Joined
·
1,152 Posts
Discussion Starter · #1 ·
THEN POST SOME PICTURES!

I am undecided on whether to go 4" or 6" with the Bilsteins I already have installed

I will probably go 6" and get it over with, but if I see some 4" pics it may suit me just fine and save myself $200-$300 :smileup:

Plan on running 35x12.5 if I go 6" and 33x12.5 if I go 4"
 

·
Registered
Joined
·
29 Posts
Everyone that goes with the 6 inch lift and 35s always wishes they would have gone with 37s. Same thing with 4 inch and 33s, you'll need 35s or you're gonna tower over the stock sized 33s.
 

·
Banned
Joined
·
1,748 Posts
Yes I have the stock 3.55 gears. Yes it is my daily driver. I have a Tuner on it Superchips Flashpaq set on 87 tune,running 89 octane and my tire size is correct with my odometer now. it drives great!! If i were to change gears to 4.56's it would be a Monster!!
 

·
Registered
Joined
·
271 Posts
How much more sluggish did it feel using the stock 3.55s on the 37s? I had an old midsize on 35s and it was almost impossible to drive with the stock gears..Not sure if Ill have money for gears for a while but it doesnt seem like many people are doing gears with 37s on the Rams
 
1 - 8 of 8 Posts
Top