DODGE RAM FORUM banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi, I'm new to the forum but have read some of the posts and find it real interesting.
I had an unexpected meeting with a drop off and am now rebuilding the front end suspension and such on my '94 4x4 2500 Ram w/cummins engine.
I crumpled both upper and lower control arms and have now removed the axle, straightened the axle brackets etc but with stock control arms my pax side is 3/16inch further back than the drivers side of the axle. Is this enough to make the truck track crooked? affect the alignment? Will it be able to be aligned? Should I break down and put adjustable control arms on it?
Thanks for any help.... cliffe
 

·
Registered
Joined
·
22,788 Posts
My first instinct is that 3/16 is quite a bit, but I will limit my response to a 'bump' so hopefully someone that knows this stuff better can advise you. :)
 
1 - 2 of 2 Posts
Top