DODGE RAM FORUM banner
1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Installed the hbs 2" kit yesterday. Went to sears to have it aligned. And afterwars I measured from tire to fender left side 6 9/16 and right side 6 3/16. Anyone else uneven like that. Called hbs and was told it should settle in about a week, but im wondering if i dont have half 2" and half 2.5" kits.
 

·
Registered
Joined
·
3,120 Posts
my truck is out by about a quarter of an inch from wheel to wheel, where are u measuring from? alot of people say from the center of the hub, but getting the venter of the hub isnt exactly perfect, measure from the bottom of the rim lip to the fender.... as far as settling down I have no idea, did u measure both rear and compare them to see if they could be out too? mine are.
 

·
Registered
Joined
·
644 Posts
Are your tires worn down? How many miles on them? I believe right rear is the primary drive so itll get worn down quicker than the other tires (especially if you spin it a bit).
 

·
Registered
Joined
·
747 Posts
There is usually some settling that happens within the first 10 miles.
I wouldn't worry about it, every vehicle that Ive owned has been uneven.
 
1 - 5 of 5 Posts
Top