Shawn ....Had a couple of days here that the temp was 10c that's when I put my badges on.Used a heat gun and warmed the area on the grill and tailgate up ,cleaned them real well and installed the badges.It's been a while since the install, lots of -25c weather got to love Canadian winters....The badges have held on either that or they are frozen on:4-dontknow::4-dontknow:.....Rob
only 55 hours hmmm. For the steering wheel I think I am going to take fuse out for horn so I won't be honking it at I try to get it off. It is a small badge on the steering wheel not sure if it has plastic pins holding it on or what.
Mine had pins on it ,at 3&9 o'clock,used a flat screwdriver to pry it up a little,then a sharp wood chisel to cut the pin off.Used a soft cloth between the steering wheel and tools as not to mark the steering wheel.:smileup::smileup:..Rob
Is it closer to 60Hrs???Gas and go(arn't those speed signs just a suggested speed??:4-dontknow
Just wanted to pass along a note to anyone who is/was/will be wondering... Plasti-dip does NOT, I repeat NOT, affect the front and rear parking sensors. Mine are fully covered with 6 or 7 coats of plasti-dip and they still work perfect.
So I bought an ‘05 1500 with 150,000 miles today. Figured I needed another truck for my biz (dudeswithatruck.com) I really can’t get over how cool and clean it looks with the dump body.
Question: I have no idea how much my dump body weighs, how much weight should it be able to carry?
Wanting to add some step rails to my 2010 ram 1500 mainly to help my wife with getting in and out of the truck. Doing so I would rather get some sweet lower profile rail steps. I like the simplicity of the iron cross matte black ones. But I wanted to see if there are some out there that others...
Installed the kit on my 13 ram , followed instructions to the letter . Tailgate seems to bind when closing . Sent them an email ---no response . Called the 800 number told the young lady my trouble and she said some 13's were having a problem .I asked if the kit number 43300 was the correct...
Went looking for step bars for my truck. Requirement was max capacity and the highest I found was 500 lb. My search came up with Raptors at $400 and these Premium Step Bars at $260. They look so alike I took a closer look at the Manufacturer Item Number and they were suspiciously similar...