DODGE RAM FORUM banner
1 - 3 of 3 Posts

· Registered
Joined
·
353 Posts
Tow hooks a a bolt on for steel bumpered trucks. You will have to modify a rubber bumper truck to install them but it can be done. Search the site, there was a thread where someone did this.
 

· Registered
Joined
·
353 Posts
tow hook filler panel

Almost forgot, you will also need the tow hook filler panel that goes mid-bumper and has the cutouts for the hooks to go thru. This is steel bumper only, there is none for the rubber bumper. Its a cheap part, only about 12 bucks. Or you will have to cut the filler panel you already have. May be easier to replace it with the correct part than to try and cut the plastic.
 

· Registered
Joined
·
353 Posts
bumper filler

Yup, the tow hooks come out the wide ends of the black filler panel in your bumper. As I said you can buy a filler panel with the proper cutouts for about 12 bucks at moparonlineparts, search parts for 2011 (tow hooks) since they don't have 2012 in there yet. Its the same part. Or you can pay a bit more and order it at your dealer. It snaps out. Alternately, you can cut out part of the filler on each side and achieve the same result, just not quite as neat.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top