Peeved or petty?

1417 Views 12 Replies 11 Participants Last post by  BlackandTan
This may be petty but when I went to pickup my brand new 2014 Ram 1500 Black Express the drivers door lock malfunctioned. It wouldn't lock remotely. It would lock manually but the locking shaft was also sticking out about 2.5 inches. The dealer says it may be due to the undercoating or paint protection. In any event, they said they would order a new lock. Well that didn't work and the next step was a software update. Apparently there is a recall [MDH 041117] for the radio frequency hub module and they did apply that. The door lock works though it was working prior to the update as I manually worked it loose anyway. But what bothers me is its still extended inches farther then the passenger side. The passenger side when locked is even with the cuts on the pin. The drivers side is extended about 2 inches out. I mean its higher than the passenger side when its unlocked. It visually looks like the door is unlocked. Is there a way to adjust the height of the door lock pin or am I just being too petty and anal?
1 - 1 of 13 Posts
I let all kinds of things slip by. This would not be one of them. I look at my vehicles 10 times a day to make sure they are locked and this would drive me. Most vehicle contents theft is because of unlocked doors and I wouldn't want mine looking unlocked.
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.