DODGE RAM FORUM banner
1 - 4 of 4 Posts

· Registered
Joined
·
163 Posts
Discussion Starter · #1 ·
I've been trying to install LED backup lights in my '14 Sport. I ordered some can bus ones and after installing them, they work fine, but I get the backup light out error. After talking with the company I ordered them from, they suggested resistors, so they shipped me some for free. Today I received them and installed them, but still get the error. Any suggestions? Thanks.
 

· Registered
Joined
·
269 Posts
I'm having the same problem. 2014 big horn. I just installed LEDs in my back up and license and I'm getting bulb out on both. Any suggestions?
 

· Registered
Joined
·
160 Posts
I've been trying to install LED backup lights in my '14 Sport. I ordered some can bus ones and after installing them, they work fine, but I get the backup light out error. After talking with the company I ordered them from, they suggested resistors, so they shipped me some for free. Today I received them and installed them, but still get the error. Any suggestions? Thanks.
What's the specs on the resistor they sent you? Where did you get the LEDs from? From what I have read lower cost bulbs seem to have the most problems. I am not too familiar with CANBUS bulbs, so hopefully someone with more knowledge will chime in. I used the method in the link below on mine and have no problems.

I'm having the same problem. 2014 big horn. I just installed LEDs in my back up and license and I'm getting bulb out on both. Any suggestions?
Check out this link, it has work for many with similar problems.

http://ramforumz.com/showthread.php?t=106466
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top