rear window swap

22881 Views 12 Replies 9 Participants Last post by  MCollins35
just wondering if anyone has swapped out their rear solid window for a sliding one before and how they did it? if you know of a write up and can post the link that would be appreciated too
1 - 1 of 13 Posts
You can pick up the window urethane from just about any body shop supply store. It'll come in a tube that'll fit in a caulking gun.

One other thing...don't let the junk yard tell you this one or that won't work. They are interchangeable as a unit from 94-01. The difference being 94 to 96 has two sliders that meet in the middle. 96-01 has a single slider.

I might be a little off on the year, but the footprint is the same if you pull the whole thing and aren't looking to just replace one pane.
My '97 has dual sliders. I had thought that the dual slider switched to the single slider in '98 when they redesigned the interior?
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.