DODGE RAM FORUM banner
1 - 2 of 2 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
I recently did several upgrades to my 2011 ram 2500. I completely replaced the exhaust from the turbo back, egr and throttle valve delete, new cold air intake, and a predator 2 tuner. My problem is a regeneration has now come up and it won't clear on the tuner. I'm sure it is because there is no longer a exhaust filter or cat and hence no where to plug in sensors. I have seen this exact upgrades done on youtube which is where I got my ideas. The issue is they do not address what to do with the sensor plugs or how to get around regeneration. Please help as I cannot drive it.
 

·
Premium Member
Joined
·
8,090 Posts
The tuner you have doesn't support removing the EGR or DPF. You need a tuner capable of doing so to take care of those issues; you won't be able to drive it until you do or reinstall the factory exhaust and EGR.

I'd recommend EZ Lynk with CTT tunes.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top