DODGE RAM FORUM banner

1 - 6 of 6 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
First, I searched and all I find is turn key to on, press gas pedal to floor three times within 10 seconds, then turn key off. Start engine - message should be gone. It isn't. Tried it a couple times to make sure.

2011 2500 MegaCab with diesel. Have changed oil at every 5K miles, and it's going in today for another oil change - just short of 15K miles. So how do I really reset that message? Thanks in advance.
 

·
Premium Member
Joined
·
32,782 Posts
What you typed was just how i did it
It took a couple times for me to get it right
 

·
Registered
Joined
·
13,690 Posts
Possibly the 2500's are different?

On my 1500 and everyone elses as far as I know:

Turn key to "ON" (not "ACC" or "START")
Press gas pedal to the floor and release 3 times (don't do this very rapidly, and make sure it goes all the way to the floor and all the way up)
Turn key "OFF" then the message should stay off.
 

·
Registered
Joined
·
36 Posts
Mine just came on and I did the "turn key to on, press gas peddle to floor 3 times, turn key off and then start" and it worked on my 2012 1500 5.7 Hemi.

Thanks guys!
 
1 - 6 of 6 Posts
Top