DODGE RAM FORUM banner

1 - 2 of 2 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter · #1 ·
Ok I am rethinking the mods I want to do, I am going with H.S 1.7 rr's, 52mm fastman TB, I have a modded kegger that I did (not installed) Gibson shorty headers, magnaflow exhaust (installed) My dilemma is I know I can get the plate kit from hughes for the kegger, But I am leaning towards the m1 intake to get rid of the plate altogether. Now some say you loose tourque and gain top end. But with the rollers and the 52mm TB I should get it back. I know hughes makes a nice intake for our trucks BUT it is a bolt on for 96 and up, It would have to be modded for a 95. What I mean by modded is it has no egr and does not have the seconded temp sensor port on the intake. Now for a few bucks more I can get the m1 that is bolt on no mods needed. Well that is where I am at right now. I have the go ahead from the BOSS (wife) after the holidays I can play with my truck. Any comments will help.

Thanks
Marshall
 
1 - 2 of 2 Posts
Top