1 - 1 of 1 Posts

7,846 Posts
The last time I did a frame repair I bought a 2 1/2 foot section from the junk yard.

I cut 3/8-1/2 inch down the middle (and welded it back together) and tucked it inside of the old frame after cleaning the inside of the old frame. After welding it around the edges I sistered a plate to the outside of the old frame and welded it. Then I drilled it on both ends and bolted it.

I just don't know what kind of access you have so you may be able to do something similar to the outside by adding a piece and going over the old frame...Just a thought.

Welcome to the forum.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.