DODGE RAM FORUM banner
1 - 1 of 1 Posts

·
Registered
Joined
·
738 Posts
try this:

Buckle belt, turn key to on position without starting,wait untill seat belt light goes off on dash, then unbuckle and rebuckle 3 times ending in the buckled postion within 60 seconds. Then start your truck and you should hear a chime sound confirming it was done. You will still see the seatbelt light on the dash but the chime will be gone.

if you have difficulty, try this thread:
http://www.ramforumz.com/showthread.php?t=45953
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top