DODGE RAM FORUM banner
1 - 3 of 3 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Goodevening. I have a 2019 Ram 1500 Laramie. Yesterday I left my truck running while I ran in the store and when I came out my radio screen was off, lights were off on instrument cluster, air conditioner off and front windows won’t go up or down with the message BLIND SPOT ALERT NOT AVAILABLE SERVICE REQUIRED. I then cut the truck off and opened the door. When I put it in ACC mode everything worked fine then once I started it all cut off with that warning message. I tried disconnecting the battery and it won’t work. I do have a taillight that is cracked so moisture did get in the housing where the module is. I took the housing off and cleaned all connections and the truck then acted right for a few hours then back to square one. Is it possible that a bad module can cause all of these things to happen? I ordered a new housing and module since it will be necessary anyway and all the dealerships are backed up until week after next.
 

· Registered
Joined
·
1 Posts
Well I changed the blind spot sensor and taillight. Problem seems to be solved. Thanks🙄
Hey Rome, how hard was it to replace your tail light and blind spot module? I’m having the exact same issue that you had and I’m being told that’s what the solution is and I’m also be given the same timeline from the dealership. I can order the parts and have them here tomorrow if it’s not too hard of a repair.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top