DODGE RAM FORUM banner
1 - 12 of 12 Posts

·
Registered
Joined
·
478 Posts
Front grill just clips on the tail gate badge is glued the same way the the ram and 1500 are on it but it also has 2 pins so when you remove it it will leave 2 holes
Thought I could help out another Ramily member but seems Dodgert gave you the perfect answer !..
 

·
Registered
Joined
·
478 Posts
Once the grille is removed you will see from the back view
 

·
Premium Member
Joined
·
32,794 Posts
There are something like 6 plastic push pins holding this piece on, i used a trim tool to take mine off, i broke 2 because i used a claw hammer at first, you can buy replacements at a NAPA store



once that piece is out of the way, there is a lot of room behind the grille



top view
I made a bug & hay shield, that fits between the grill & cooling radiators, it keeps debris out of those components fins
if that was not there, you would have more working room yet

 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top