DODGE RAM FORUM banner
1 - 2 of 2 Posts

· Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
I have an android app for my phone called torque. It's a program that monitors your vehicles real time information and can be used as a diagnostic tool thru the OBD port via bluetooth.

The program is saying that when my Hemi is at idle the throttle body position is at 12% and at WOT it's at 86.7%. I would assume 100% at WOT. Do you think think the throttle body is at 86% as claimed by the diagnostic tool? I'm curious if there is a way to relearn the throttle body position? Vehicle is 100% stock.

The other curious thing I see is the air intake temperature is usually +4 to +7degrees Fehrenheit warmer than what the outside temperature reads on my EVIC. I wonder if a cold air intake would bring the temperature delta closer to zero?
 

· Registered
Joined
·
37 Posts
Discussion Starter · #6 ·
as for the TB blade position, have you pulled the battery cable and let the computer reset? You may need to reset the adaptive learning and then see how it functions, also I'd recommend getting a proper diagnostic tool rather than a phone app that's not properly calibrated to your vehicle.
I have not tried to pull the battery cable. The phone diagnostic tool is for pleasure. It's more of a "hey check out the cool things I can view" I figured the phone app has the error, but maybe not?

FrostKing said:
Your throttle body reading is in degrees angle, not percentage. 90 is wide open. 91 will throw a code if you modify the throttle body to open that far.
The app is showing a percentage sign, not a degree sign. If it's 86 degrees of angle, your statement would make since, but it's says 86% open (or 77 degrees of angle)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top