Do you know the history of the truck, where it's been and how it's been driven? The truck has had to hit something pretty big and solid to get the rear wheels unsquare from the frame.
Thrust Angle Off
So I recently brought my 09 in for an alignment after noticing that my new tires were not wearing to my expectations. I have an 09 1500 Crew Cab with 60k miles. About the only thing that I have done is installed the Bilstein 5100 on the factory setting in the front and at the same time threw on a set of Bilstein's in the back.
The mechanic that performed my alignment was able to get the front aligned but made mentioned that the Thrust Angle was off and he isn't real sure why.
So... I ask of all of you who are much more mechanically inclined then myself, if you have any ideas or suggestions on why the Thrust Angle would be off and any tips or suggestions on what a guy has to do on an 09 to get it back into tolerance.
Any help or feedback would greatly be appreciated!
The mechanic that performed my alignment was able to get the front aligned but made mentioned that the Thrust Angle was off and he isn't real sure why.
So... I ask of all of you who are much more mechanically inclined then myself, if you have any ideas or suggestions on why the Thrust Angle would be off and any tips or suggestions on what a guy has to do on an 09 to get it back into tolerance.
Any help or feedback would greatly be appreciated!
1 - 1 of 8 Posts
1 - 1 of 8 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
DODGE RAM FORUM
We’re the ultimate Dodge RAM forum to talk about the RAM 1500, 2500 and 3500 including the Cummins powered models.
Full Forum Listing
Top Contributors this Month
View All
Chief05
283 Replies
NevadaMike
272 Replies
airforce26yrs
61 Replies
Recommended Communities
