DODGE RAM FORUM banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hi guys
I got a 2010 trx4 if I put a 1.5 inch
Body lift and a 1.5 level will I be able
To fit 325/65r18.will the 1.5 level
Be to much angle for my cvs.what
Would be a good offset for my rims
Thanks
Shawn
 

·
Registered
Joined
·
417 Posts
I would think so. I just sold my 2010 TRX4 with a Ready-lift 2.5" in front and 1.5" in the rear and was running 35"X12.5"X17" with no rubbing. I did have a vibration in 4 wheel at WOT. Wheels had a 4.5" backspace.
 

·
Registered
Joined
·
417 Posts
Low speed only to about 60km/hr. If you increased speed slowly you wouldn't notice the vibration but if you put the pedal to the metal it was a strong vibration. Once you hit highway speed it disappeared completely. Where in Ontario are you?
 
1 - 5 of 5 Posts
Top