DODGE RAM FORUM banner
1 - 8 of 8 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Just bought some sweet 20x9 Incubus wheels for my 2011 Bighorn. My question is, the offset on the new wheels is 10mm and the stock 20's offset is 19.5mm...will i have rubbing issuse? Tires will be the same as stock 275 60 20. Thanks.....
 

·
Registered
Joined
·
2,414 Posts
I think you'll be ok. 9mm difference is appox 1/3". now if you ever go with a taller or wider tire you may run into problems.

One way to check would be to turn your steering wheel to full lock left and right. stick your head under there and see how close your stock setup is to the suspension parts at full lock. if you have at least 1/2" of clearance I think you'll be ok with your new wheels.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top