[jaksteele9]

Hi everyone, just a quick question regarding wire colors under the dash. I'm running some white LEDs under the dash and want to connect them to the dome lights so they turn on when I open the door. I'm pretty sure the that the wire is blue but not exactly sure. If anyone has done this and could help, please post. I have a 2007 ram 1500 sly by the way.

 

[thunderhawk]

http://www.ramforumz.com/showthread.php?t=174599 A link I posted to A wiring diagram I found On the dodge rams

 

[rcmpvet]

Herte is a link for the Chrysler Wiring Diagrams, you just have to input VIN, etc.

https://techauthorityonlinedemo.extra.chrysler.com/service/repair/wiring/view/classic.htm

 

[ucanthngwme]

Man, I looked at that link, and don't understand when it says yellow/light blue. Does that mean it is one wire in the pillar? I'm looking to add LEDs that work off the dome also. 2008 1500.

 

[rcmpvet]

Yellow/lt blue is one wire, the "+" you see printed in description is to tell you that is the positive wire and there is no negative as it grounds itself to the vehicle A pillar.

 

[ucanthngwme]

^Much appreciated.

 

[ucanthngwme]

Herte is a link for the Chrysler Wiring Diagrams, you just have to input VIN, etc.

https://techauthorityonlinedemo.extra.chrysler.com/service/repair/wiring/view/classic.htm

That link is awesome!

 

[ucanthngwme]

Yep, mine was yellow with blue stripe. I just wired some LEDs inside the grill.
I wanted to tap into the cargo light, but couldn't find the wires!
I popped the third light/cargo light out and there were 4 wires. When I got into my A-pillar, I used a test light and tried all the wires to find the cargo light, and no luck.