DODGE RAM FORUM banner

Yes, another de-badging thread...the less mess edition! (with pics)

2397 Views 4 Replies 4 Participants Last post by  abadiechris
washed my rig and parked it inside just in time for the big storm, decided to take the day off and spend some time playing. Been wanting to debadge this thing since the day i brought it home a month ago. whole job took about 2 hours, taking my time, including tailgate.


Before.... no kidding

mmy weapon of choice....heated up each letter individually, takes about 30 seconds a piece on low to get them loose enough to slide the sharpened paintstick behind as mentioned by AzHunter here- http://ramforumz.com/showthread.php?t=92968 the heat gun makes the job very easy.


this is what you're left with if everything goes right....just the adhesive. As you can see the bottom edges have been rolled up, thats what the paintstick does. Now, alot of guys are using rubber erase wheels or trying to scrape the adhesive off with the paintstick....STOP! take a break, let the adhesive cool down to room temp, now with your fingers start picking and pullin g at the opposite end of where you pushed the paintstick under....if you try the same spot it will be extremely difficult as the paintstick and heat smear the adhesive.


Heres what happens if you wait for it to cool.....very easy removal. Please excuse the busted thumb


No thanks on the eraser wheel


this is what you're left with....a little bit of adhesive that was smeared by the stick, and probably a little dirt thats been underneath there for god knows how long.


this is where a little bit of solvent will come in handy, use whatever you want, this is what i use at my shop so its what i used here. any wax and grease remover will do, or goo gone if youre into that greasy orangey garbage.


I use scotts shop towels on a roll for everything, worked great for this job, gentle on the paint but strong enough to pick up the adhesive without scratching. I actually went over the sticky spots with a pretty heavy amount and let it soak in first so i didnt have to scrub the paint and possibly scratch it


Voila....make sure to take a minute and give the area a coat of wax, unprotected paint is unhappy paint.


then play with your letters obviously


dont forget the tailgate.....and get rid of that dealership sticker while you're at it.

There you have it....the less mess edition


:smileup:
  • Like
Reactions: daggertats
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top