Found your post in the suggested section. I changed my oil this weekend and was reminded of the filter location and mess. Did you ever order one of these?
I've been on the fence of doing something or even relocating the filter as well. I'm a little nervous about relocating due to many factors such as. Now having two extra rubber hoses supplying the life blood to your motor and are diameter of these hoses big enough etc.

 

Found your post in the suggested section. I changed my oil this weekend

Yes I did I got it off Amazon if I remember correctly it maybe right from the manufacture. Any it’s great and work perfectly. I bought the larges one they sold.

 

I saw a tip on one of the boards. It was to use a ziplock bag. Pull it over the filter as you loosen it. Keep turning until it falls into the bag... Haven't done it yet, seemed like a great idea though

 

I saw a tip on one of the boards. It was to use a ziplock bag.

I tried that but the oil was so hot I couldn't hang on to it without burning my hand. Wasn't ready for that, I like to drain the oil when the engine is warm.

 

Mopar makes a offset for the ram, installed and now do not have the problem.

 

what year is your vehicle as I remember the offset did not fit my 2016 I think

 

Looks like a motorcycle tube would do the trick. I have used a quart sized Zip Top bag. If you loosen it with your wrench, then slip the bag over it and put you mechanix wear type glove on you should be good. My 02 4.7 Durango has been a PIA since day one. It drains all over the frame, then drips into channels and "leaks" onto driveway for days. If they are using a -8 or so line its probably plenty big enough. That would be 1/2" line.