at least 2 of our vendors can supply the parts
1 of them carries the OEM type mirrors, the other is after market

Moparonlineparts & A1auto

you will need the correct mirror(s), the correct in door module(s) & the correct door switch(s)
You will likely need the dealership to enter the correct Sales Code to get it to function

 

If I already have folding mirrors with the lights wouldn't it be plug and play?
Sorry I'm new to this!

 

I think the power fold will work. I believe the issue is how the pad to adjust the mirrors works when they are folded up in tow position. I'm assuming they will adjust normally when they are in the non-tow position. When you fold them up to tow I believe the up/down and left/right will no correspond how you would expect them. I think they will still be adjustable, but it might take a little while to get used to. I believe I read that someone was able to save the tow mirror settings as a second driver setting for quick recall. Again, I don't have the tow mirrors so it's a lot of speculation on my part. I have the power fold mirrors and I'm considering doing the same as you.

 

these are the mirrors I'm looking at:
https://www.1aauto.com/2013-16-ram-mirror-pair-trail-ridge-tr00042/i/trmrp00042?f=1111810&y=2014

 

I got my tow mirrors from 1A Auto and they have all the features (power adjust, power fold, heat, turn signals, puddle lights). When they are flipped up the directions for adjusting them are sideways, up is left, down is right, etc., but the memory function works and I have my non-towing position saved as one memory and towing with them flipped up as position 2, and that saves you the time and quirks of adjusting them. They work great!

 

what is the part number to the mirrors?

 

I ended up doing a warranty replacement on the orginal set, the temperature sender got funky and as reading below zero.. Good news as 1A replaced them, no questions asked, and they didn't even want the old ones back. They look exactly the same as the first set, but the part # changed on the new set. The new part # is 1AMRP01886. You have to take the doors apart to put them on, but it's painless (takes 15 minutes) and they're plug and play with the stock truck wiring.

 

Can anyone tell me how to figure out if I have a temperature sensor on my 14 big horn hemi
I am looking to order tow mirrors to replace stock ones. I have heat and power but not sure about temperature
any help would be great thanks
paul

 

You do have the temp sensor in the mirror, 2013 and up all have it in the mirror