I have recently installed a new double din or tried too ..... it has power but will not turn on fully when testing the red (ignition) no power on the new harness end.. but on the factory harness I have power.. but here is my question I’m going off the two red and gray wires as the ignition on off maybe I’m wrong because they are showing power even with the key off ?? Am I using the wrong wires? Thanks for any help
Austin619
Have you looked at the Crutchfield website to read the install instructions for your truck & that particular double din radio ?
Should be (not a Guarantee)
On the '07 it should be brown with a red stripe. Thats basic, but due to different trim levels, and different stereo options it might be different for yours. I found this post which might help you out.
https://www.ramforumz.com/showthread.php?t=48167
On the '07 it should be brown with a red stripe. Thats basic, but due to different trim levels, and different stereo options it might be different for yours. I found this post which might help you out.
https://www.ramforumz.com/showthread.php?t=48167
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
